RoboMaster 2020 Technical Challenge Final Robot Assessment Video Instruction
2020-06-28
The Final Robot Assessment Video is a key component of the
technical assessment process. The team needs to submit the video and BOM form of
the corresponding project.
Exam scores of Final Robot Assessment Video can be an important reference when choosing which regional competition to enter.
1. Participants:
(1)Team Captains will submit a Final Robot Assessment Video as a representative of their team. Each team will submit one Assessment Video using the Team Captain’s account on the RoboMaster registration system.
(2)If a team registers for more than one challenge, they must participate in the Final Robot Assessment Video section of each challenge according to the following rules.
Challenge |
Rule |
Dart Targeting |
Teams that have
passed the Referee System Exam must participate in the Final Robot Assessment
Video section of Dart Targeting. |
Standard Racing
and Smart Firing |
Teams that have
passed the Final Robot Assessment Video section of Robotics Competition do
not need to participate in the Final Robot Assessment Video section of Standard
Racing and Smart Firing. |
2V2 Confrontation |
Teams that have passed the Final Robot Assessment Video section of
Robotics Competition do not need to participate in the Final Robot Assessment
Video section of 2V2 Confrontation. |
Engineer Projectile Obtaining |
Teams that have passed the Final Robot Assessment Video section of
Robotics Competition do not need to participate in the Final Robot Assessment
Video section of Engineer Projectile Obtaining. |
2. Submission time: September 18, 2020 to September 20, 2020 (Beijing time) (to be determined)
3. Submission opportunity: once
4. Basic Requirement: Display video of the participating robot of each challenge and its BOM Report
5. Video requirements:
1) College name and date and location of recording must be shown at the beginning of the video
2)Every process must include captions or information boards, which must provide clear and accurate explanations for each process shown in the video
3)Ensure only relevant content is shown and the video is tightly edited lasting no longer than three minutes.
4)The video’s resolution must be higher than 720p.
6. Submission Method:
1)Upload the video to Youku/YouTube and set an access password
2)Submit the video URL, access password and BOM Report through the registration system
7. Assessment Requirement: Different requirements and scoring standards apply to different items as set out in the table below:
1)Final Robot Assessment Video Requirement
Parameter |
Display content |
Scoring Criteria |
Score |
||
Criteria for Pass |
Criteria for Full Score |
||||
Standard Racing and Smart Firing |
Appearance |
Circuit and electronic components have been protected to a
certain extent and there are no bare wires Have certain shape The number and combinations of coating color meet the
requirement |
Circuit and electronic components have been protected
properly and there are no bare wires The aesthetic design is excellent and the shell is
sophisticatedly manufactured The number and combinations of coating color meet the
requirement and the coating design is aesthetic |
10 |
|
Complete movement: |
Show normal movement |
There is no HP deduction caused by power consumption
exceeding the limit during the rapid shuttle run and the omni-directional
movement is flexible |
5 |
||
Launch 50 rounds of 17mm projectiles successively to the
Small Armor Module three meters away and calculate the hit rate |
Hit rate is no less than 50% |
Hit rate is no less than 90% |
20 |
||
Climb a 15-degree slope and display the power consumption
data in real time |
When climbing the 15-degree slope, there is no HP deduction
caused by power consumption exceeding the limit |
Make the most of buffer energy and ensure that the power is
stable with no HP deduction caused by power consumption exceeding the limit |
10 |
||
Display of the mounting location of the Referee System |
Display the mounting hole of each referee system module
separately The duration of mounting hole display of each module shall
be not less than one second |
Display the mounting hole of each referee system module
separately and the mounting effect of the full set of the Referee System |
20 |
||
Launch Ramp |
Can launch the ramp Can move normally after launching the ramp |
When launching the ramp, there is no HP deduction caused by
power consumption exceeding the limit After launching the ramp, the robot lands smoothly and
there is no collision of frames |
20 |
||
Activation of power runes |
Can automatically recognize and hit the Armor Module seven
meters away |
Can activate the Power Rune successfully |
10 |
||
Other highlights |
Except the above display content, there is one extra stable
highlight to display |
Except the above display content, there is two or more
extra stable highlights to display |
5 |
||
2V2 Confrontation |
Standard |
Appearance |
Circuit and electronic components have been protected to a
certain extent and there are no bare wires Have certain shape The number and combinations of coating color meet the
requirement |
Circuit and electronic components have been protected
properly and there are no bare wires The aesthetic design is excellent and the shell is
sophisticatedly manufactured The number and combinations of coating color meet the
requirement and the coating design is aesthetic |
5 |
Complete movement: |
Show normal movement |
The power consumption should not exceed the limit during
the rapid shuttle run and the omnidirectional movement is flexible |
5 |
||
Launch 50 rounds of 17mm projectiles successively to the
Small Armor Module three meters away and calculate the hit rate |
Hit rate is no less than 50% |
Hit rate is no less than 90% |
10 |
||
Climb a 15-degree slope and display the power consumption
data in real time |
When climbing the 15-degree slope, there is no HP deduction
caused by power consumption exceeding the limit |
Make the most of buffer energy and ensure that the power is
stable with no HP deduction caused by power consumption exceeding the limit |
10 |
||
Display of the mounting location of the Referee System |
Display the mounting hole of each referee system module
separately The duration of mounting hole display of each module shall
be not less than one second |
Display the mounting hole of each referee system module
separately and the mounting effect of the full set of the Referee System |
10 |
||
Other highlights |
Except the above display content, there is one extra stable
highlight to display |
Except the above display content, there is two or more
extra stable highlights to display |
10 |
||
Sentry |
Complete movement on the Sentry Rail |
Can move stably on the Sentry Rail |
Can move stably and rapidly on the Sentry Rail and there is
no HP deduction caused by power consumption exceeding the limit |
5 |
|
Launch 50 rounds of 17mm projectiles successively to the
Small Armor Module three meters away and calculate the hit rate |
Hit rate is no less than 50% |
Hit rate is no less than 90% |
15 |
||
Display of the mounting location of the Referee System |
Display the mounting hole of each referee system module
separately The duration of mounting hole display of each module shall
be not less than one second |
Display the mounting hole of each referee system module
separately and the mounting effect of the full set of the Referee System |
10 |
||
Visual counterattack |
Can recognize armors |
Can rapidly recognize armors of a moving Standard The attack hit rate is greater than 50% Can defeat a moving Standard within 15 seconds |
20 |
||
Engineer Projectile Obtaining |
Complete movement: |
Show normal movement |
Shuttle run is rapid and the omnidirectional movement is
flexible |
20 |
|
Climb the slope |
Can climb the 15-degree slope Pass |
Pass the 15-degree slope rapidly, move stably, evenly and
flexibly |
20 |
||
Obtain projectiles |
Can obtain projectiles inside the Projectile Container on
the Resource Island |
Can obtain all projectiles inside the three Projectile
Containers on the diagonal position of the Resource Island, hand over
successfully and display the duration of the whole process |
60 |
||
Dart Targeting |
Adjusting the angles of pitch and yaw axes of the dart
launcher |
Have angle adjustment mechanism |
Can rapidly adjust the axis angle of pitch and Yaw |
20 |
|
Loading and launching darts |
Can launch and load darts |
Can continuously load and launch darts |
20 |
||
Launching darts to attack a target at an outpost’s distance |
Can launch darts near to the target at an outpost’s
distance |
Can hit the target |
40 |
||
Demonstrating the installation of the Referee System (or
the installation spot reserved for the Referee System) |
Display the mounting hole of each referee system module
separately The duration of mounting hole display of each module shall
be not less than one second |
Display the mounting hole of each referee system module
separately and the mounting effect of the full set of the Referee System |
20 |
2)BOM Report Requirement
Display content |
Scoring Criteria |
Score |
|
Criteria for Pass |
Criteria for Full Score |
||
BOM Report |
Part BOM is complete, including unit price and total price |
Clear classification of modules Information is true and complete Intuitive presentation of data |
10 |
8. Privilege Granted: The team will qualify for the China Regional Competition.
[Gentle Reminder]
Use the latest version of Chrome to log into the Captain’s account and enter the “Mid-Term Robot Assessment Video” interface to submit the video URL, access password and BOM Forms.